In the Kit
| Item Name | Qty | When to Replace? | Replacement Guide |
| Silicone Sock for Hotend | 3 | 1. When cracks are seen 2. When is loose fitting 3. When is broken |
Wiki Page |
| Filament Cutter | 3 | Every 10-15 spools of filament used (or quicker) to ensure the cutting performance is unaffected | Wiki Page |
| PTFE Tube | 1 | 1. With normal use, replace every 2 months to ensure the filament movement is not restricted in any way 2. When using more abrasive filaments, replaced every 1 month, or whenever clear wear is present. |
Wiki Page |
| PTFE Tube Connector | 3 | 1.The PTFE tube can not be secured 2.The filament cannot pass through the pneumatic connector 3.The pneumatic connector is damaged |
Wiki Page |
| Bambu Scraper | 3 | When the scraper blade gets dull or rust | Video Link |
| Extruder Gear Assembly | 1 | Abrasion or clogging due to extended use | Wiki Page |
| Nozzle Wiper | 3 | When it is deformed or cracked | Wiki Page |
| AMS Feeding Funnel | 1 | Funnel-shaped feeding inlet is seriously worn, which has affected the loading and unloading filaments | Wiki Page |
General Inquiry
Technical Support