In the Kit
| Item Name | Qty | When to Replace? | Replacement Guide |
| Silicone Sock for Hotend | 3 | 1. When cracks are seen 2. When is loose fitting 3. When is broken |
Wiki Page |
| Filament Cutter | 3 | Every 10-15 spools of filament used (or quicker) to ensure the cutting performance is unaffected | Wiki Page |
| PTFE Tube | 1 | 1. With normal use, replace every 2 months to ensure the filament movement is not restricted in any way 2. When using more abrasive filaments, replaced every 1 month, or whenever clear wear is present. |
Wiki Page |
| Lubricant Grease and Oil | 2*2 | Please refer to the Wiki Page | Wiki Page |
| Bambu Scraper | 3 | When the scraper blade gets dull or rust | Video Link |
| Extruder Gear Assembly | 1 | Abrasion or clogging due to extended use | Wiki Page |
| Nozzle Wiper | 3 | When it is deformed or cracked | Wiki Page |
| Purge Wiper | 1 | 1. Inadequate cleaning of the nozzle during the pre-print preparation step 2. Filament adhering to the purge wiper flap 3. Visible damage or wear on the purge wiper |
Wiki Page |
General Inquiry
Technical Support